|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Category 5e FTP Installation
Cables |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
comply with all
category 5e requirements as per ANSI/TIA/EIA, ISO/IEC, and
CENELEC EN standards: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
- ANSI/TIA/EIA
568-B.2
- ISO/IEC
11801 CLASS E, 2nd Edition
- CENELEC
EN 50173-1
- CENELEC
EN 50288
- flame
Retardancy is verified according to IEC
60332-1-2.
- RoHS compliant
- 3P certified
ANSI/TIA/EIA-568-B.2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electrical
Characters |
|
|
|
|
|
|
|
|
|
|
|
| |
Spark Test |
850 V ac |
| |
Dielectric Strength |
2500 V dc / 3 seconds |
| |
Insulation Resistance Test |
Min. 150 MO/Km |
| |
Conductor Resistance |
Max.9.38 O/100m at 20? |
| |
Resistance Unbalance |
Max. 5% |
| |
Capacitance Unbalance |
Max. 330 pF/100m |
| |
Mutual Capacitance |
Max. 5600 pF/100m |
|
|
|
|
|
|
|
 |
Top |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Application: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
- Voice,
T1, ISDN
- 10BASE-T,
100BASE-Tx Fast Ethernet (IEEE 802.3)
- 100 VG
- anyLAN(IEEE802.12), 155/622 Mbps ATM
- 550 MHz
Broadband Video
- 1000BASE-T
Gigabit Ethernet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| |
|
Cat.5e 90 ° Shielded Keystone
Jack |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- conform
to TIA/EIA-568B, ISO/IEC 11801 and EN50173-1
specifications
- fully
shielded design for effective EMI protection
- supports
T568 A&B wiring & easy installation
- dual IDC
connector can accept 22-26 AWG solid cables
- termination
by 110 or Krone tools
- ETL certified
for channel to ANSI/TIA-568-B.2 Category
5e
- RoHS compliant
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Application: |
|
|
|
|
|
|
|
|
|
-
100BASE-Tx
Fast Ethernet
-
10BASE-T,
-
Voice,
T1, ISDN
-
Outdoor
application
|
|
|
|
|
|
|
|
|
|
Cat.5e Shielded Patch
Panel |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features |
|
|
|
|
|
|
|
|
|
- conform
to TIA/EIA-568-B.2, ISO/IEC
11801 and EN 50173-1 category
5e specifications
- no
tools needed to open or close
the rear cover
- IDC
connector for 22-26 AWG solid
and stranded cable
- supports
T568 A&B wiring & easy installation
- terminate
using 110 or Krone tools
- dimensions
and mounting compliant with
EIA-310D
- height:
1U
- color:
black or RAL 7035 (light grey)
- panel
material: SECC/1.6mm thickness
- rear
cover material: SECC/1.0mm
thickness
- PCB
material: FR4/1.6mm thickness
- IDC
connector housing material:
- polycarbonate /UL 94V-0
- IDC
connector contact material/plating:
phosphor bronze/tin plating
over nickel
- IDC
connector operating life:
minimum 250 re-terminations
- PCB
jack housing material: glass
filled polyester UL94-0
- PCB
jack contact material/plating:
phosphor bronze/50ì inch gold
over nickel
- PCB
jack operating life: minimum
750 insertions
- inclusive
ground wire, cable ties and
set of screws (6M)
- ETL
Verified Channel to ANSI/TIA-568-B.2
Category 5e
- RoHS
compliant
|
|
|
|
|
|
Application: |
|
|
|
|
|
-
100BASE-Tx
Fast Ethernet
-
10BASE-T,
-
Voice,
T1, ISDN
-
Outdoor
application
|
|
|
|
|
|
|
 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Category 5e F/UTP Patch
Cord |
|
|
|
|
|
|
|
|
|
|
|
|
Features |
|
|
|
|
|
|
|
comply with all
category 5e requirements as per ANSI/TIA/EIA, ISO/IEC, and
CENELEC EN standards: |
|
|
|
|
|
|
|
|
|
- ANSI/TIA/EIA
568-B.2
- ISO/IEC
11801 CLASS E, 2nd Edition
- CENELEC
EN 50173-1
- CENELEC
EN 50288
- flame
retardance according to IEC 60332-1-2
- RJ45 shielded
connector 50ì gold plated
- PVC molded
snag proof boot
- RoHS compliant
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
